Peel Away 1 Paint Remover

Oil – Enamel – Lead

1 application removes multiple layers of paint

Peel Away is a revolutionary patented concept in paint removal. The Peel Away system has been specially formulated to remove multiple layers of paint in one clean fast application.

The product is supplied with Peel Away paper sheets, application spatula, application guide and product datasheet.

Removes up to 30 layers of paint in one application
Provides safe lead and Asbestos paint removal
No toxic fumes
Less labour intensive
Preserves most substrates
Removes multiple coats of oil, lead, enamel, Asbestos paint, polyurethane and wallpaper

Use Peel Away 1 On

Bricks

Concrete

Cast Iron

Pressed Metal

Don't Use On

Aluminum

Veneer

2 Part Urethanes

Antique Furniture

Baked Enamels

Pure Acrylics

It’s Proven

Peel Away® is a revolutionary patented concept in paint removal. The Peel Away® system has been specially formulated to remove multiple layers of paint in one clean fast application. Peel Away offers a concise range of products to satisfy most stripping requirements. Numerous projects have successfully used the Peel Away® system for over 28 years.

It’s Unique

Peel Away® provides innovative solutions for paint removal. With our special laminated paper sheets it completely seals the stripping process preventing atmospheric pollution and contamination. It is safe for the removal of all types of paint including Lead paints, saving the environment by fully containing the waste. The products do not contain harmful solvents which reduces risks to our health.

It Works

The product is a thick paste that is applied to a painted surface and covered with our special laminated paper. The product is sealed in and will emulsify and soften the many layers of paint over a period of time. The laminated paper sheet is then peeled away with the paint carefully, ready for disposal. The surface is then washed with water.

Watch The Video

See how easy it is to use Peel Away 1 in this short 1 minute video.

3 Step Application

Step 1

Trial Patch – ALWAYS PERFORM A TRIAL PATCH BEFORE EVERY JOB! An evaluation should always be completed before undertaking any paint removal project. All surfaces vary and may have many different layers of paint. 350g Kits are available from our store online or authorised distributors around Australia. Please refer to our guides on how to perform a trial patch.

Step 2

Apply Peel Away ® paste 3-4mm thick (recommended rate) to the painted surface evenly. Then cover the Peel Away® with the supplied special laminated Peel Away® paper, printed side facing out. Use masking tape to tape down all sections and edges as best you can to create an air-tight seal, which allows Peel Away to work at maximum strength. Most surfaces you will need to leave on for 72 hours. In some cases with very old or heritage listed buildings it may require 7 days for optimal results.

Step 3

Remove the Peel Away® from the surface by gently sliding a spatula/scraper behind the paper and ease the paint, paste and paper off in one piece. Remove in small sections and scrape off loose debris and residue. Wash the surface thoroughly with water, nylon brush and sponge.